How to Register Cisco Tandberg MXP (WebUI)

To access the system using the Tandberg web interface (software F8.2):

1. On a computer, open a web browser.

   In the browser address line, enter the system’s host name or IP address, for example, http://10.11.12.13, to go to the web interface.  If Security Mode is enabled on the system, you must use secure HTTPS access on port 443, for example, https://10.11.12.13. If prompted, enter the user name and the system password to access the web interface.

   

    

2. Navigate to System Configuration / H.323

   

   a) Callsetup Mode: Gatekeeper
   b) E.164 Alias: The H323 Extension(E.164) assigned in the confirmation email from Easymeeting.net.
   c) H.323 ID: The H323 Name assigned in the confirmation email from Easymeeting.net.
   d) Use Gatekeeper Discovery:  Manual
   e) Gatekeeper IP Address: The one you have received from Easymeeting.net.
   f) Press Save-button at the bottom of the screen to save and confirm the registration.

You may test your registration by calling 900.