Note that this must be done through the Web UI, and can not be done in the system menu.
Enter the web interface of your video conferencing endpoint to register a Polycom Group System to Easymeeting:
- On a computer, open a web browser.
In the browser address line, enter the system’s host name or IP address, for example, http://10.11.12.13, to go to the Polycom HDX web interface. If Security Mode is enabled on the system, you must use secure HTTPS access on port 443, for example, https://10.11.12.13.
When prompted, enter the user name admin and your system password to enter the Main Menu:
- Navigate to "Admin Settings > Network > IP Network".
a) Enable IP H.323: On/Checked
b) H.323 Name: The H323 Name assigned in the confirmation email from Easymeeting.net.
c) H.323 Extension (E.164): The H323 Extension(E.164) assigned in the confirmation email from Easymeeting.net..
d) Use Gatekeeper: Specify
e) Gatekeeper IP Address: The one you have received from Easymeeting.net.
f) Press the Save-button to save and confirm the registration (current Gatekeeper IP will show up in the non ediable field above "Primary Gatekeeper IP Address" field).
You may test your registration by calling 900.