IN CALL FEATURES
MUTE OR UNMUTE THE MICROPHONE
Press the Mute key on the remote control ( ) to turn off the local microphone. Press the Mute key again to turn on the microphone.
Press the big center button the microphone to turn off the local microphone, and press the same button again to turn on the microphone.
Blue led on the microphone indicates that it’s on and are sending audio.
No light on the microphone is a indication of no audio sent to the other end.
Press the volume button on the remote control to adjust the output volume.
Press + to turn the output volume up, and - to turn the output volume down.
The position of the local camera can be adjusted by the remote control when the terminal is idle or in conference. In order to adjust the camera when the terminal is idle, press return on the remote until only the camera view is showing, no on screen menu.
On the remote control, press the up, down, left and right direction keys to adjust the camera angle.Press the “zoom in/out” key on the remote control to zoom in or zoom out.
To adjust a far end camera when in a call, press the Near/Far key until the Far End Camera icon appears on the TV screen. Adjust the camera as necessary.
Easymeeting TWS include support for sharing data from the presentation input (typically a personal computer connected to the terminal) while simultaneously showing video from the primary input. This enables you to view a live presenter and the content at the same time.
Connect your laptop and press the content button to start the presentation. A message appears asking you if you want to send or preview the presentation. Press the content button one more time to send presentation or stop the preview.
To stop presentation, press the content button followed by the OK button on the remote.
The far end can also start a presentation, which halts the current presentation at the near end. The following indicators appear in the user interface when you send or receive a presentation:
Press the Stop presentation button again to stop the presentation.
When the terminal is not in conference, the available display modes are GUI menu mode and local video mode.
When the terminal is in conference, the available display modes are determined by the configuration of Video Output. Press the Layout key on the remote control repeatedly to switch between different layout modes.