TWS BRACKET INSTALLATION GUIDE
PLACING THE TERMINAL ON A DISPLAY
Step 1 & 2
Put the slider into the sliding rails on the mounting bracket, connect the monitor bracket with the slider, tighten the connection without screwing down so that the monitor bracket can slide along the rails.
Place the mounting bracket on the television, adjust the monitor bracket according to the width of the TV to clamp the TV with the rack, tighten the slider nut.
Place the Easymeeting TWS terminal on the rack by inserting the Easymeeting TWS terminal into the screw hole in the rack.
Tighten the screws with the cross screwdriver from the bottom of the steel plate to finish the installation.
PLACING THE TERMINAL ON A WALL
Mark on the wall to be installed by putting the wall-mounted bracket on it, and drill holes at the marked place.
Fasten the wall-mounted bracket on the wall using expansion screws.
Connect the mounting bracket with the wall-mounted bracket, and tighten the screws.
Place the Easymeeting TWS Terminal on the rack by putting the screw hole into the screw on the steal plate. Use a cross screwdriver to tighten the screws from the bottom of the mounting bracket to the Easymeeting TWS terminal, and complete the installation.