Camera Settings
1. Press the Camera key on your remote controller. The Video Source screen is displayed.
2. Select Setting. The Setting screen is displayed.
If the Please input administrator password dialog box is displayed after you press the Camera key, enter the correct password and select OK. The Setting screen is displayed.
3. Set parameters as required. For camera parameter description, refer to the table below.
Parameter |
Description |
Exposure Mode |
Options: Aperture Priority, Shutter Priority, and Auto Exposure (recommended). |
Aperture |
If you set Exposure Mode to Aperture Priority, you need to select the level of the aperture. In the settings, a larger F value means a smaller light input and lower luminance. |
Shutter Level |
If you set Exposure Mode to Shutter Priority, you need to select the level of the shutter. In the settings, a smaller shutter level means smaller exposure time and lower luminance. |
Exposure Comp. |
If Exposure Mode is set to Auto Exposure, you need to select a value for Exposure Compensation. Select exposure compensation to increase or decrease the exposure. In the settings, a larger EV value means larger exposure and higher luminance. |
Back Light |
Set whether to have the camera automatically adjust for a bright background. Back Light is best used in situations where the subject appears darker than the background. Enabling this setting helps to relieve a bright background. |
ISO Level |
Select the International Standards Organization (ISO) level. Auto is recommended. In the settings, a larger ISO value means a larger exposure speed and higher luminance. |
White Balance |
Set the white balance based on the indoor lighting conditions. Options: Auto (recommended) , Daylight, Cloudy, Shadow, FL White, FL Normal, FL Daynight, and FL Bulb. Notes: FL is an abbreviation of fluorescent. |
Sharpness |
Set the sharpness of the images. Options: Low, Middle, and High (recommended). |
Noise Reduction |
Set the noise reduction. Options: Off, Low, Middle, and High (recommended). |
Inversion |
Set whether to flip video image upside down. Options: Open and Close.
|
Comments
0 comments
Please sign in to leave a comment.