Yealink & Dual Displays

The Yealink has two display ports. When connecting only one display device to the Yealink codec, Display 1 port is the only available port. To make it easier for users to view video images, users can connect two display devices to Display 1 and Display 2 ports respectively. When two display devices are connected to the Yealink codec, the status bar of the primary display device will display  icon.

When two display devices (dual screen) are connected to the Yealink codec: 

When the endpoint is idle and does not start a presentation.

• In the primary display device, the local video image is shown in full size.
• In the secondary display device, the local video image is shown in full size (no menu and status bar).

When the endpoint is idle and starts a presentation.

• In the primary display device, the local video image is shown in full size. 
• In the secondary display device, the presentation is shown in full size (no menu and status bar).

When the endpoint is during a call and does not start a presentation.

• In the primary display device, the remote video image is shown in full size.
• In the secondary display device, the local video image is shown in full size.

When the endpoint is during a call and starts a presentation.

• In the primary display device, the remote video image is shown in big size, local video image along the right side of the screen is shown in small size.
• In the secondary display device, the presentation is shown in full size.

You can specify the display content on the secondary display device via the remote control.

To specify the display content on the secondary display device via the remote control:

1. Press the More soft key during an active call.
2. Select Focus (Display2), and then press  
3. Press or to select the desired content, and then press . The secondary display device displays the selected content. The  icon is displayed on the focus content. After reassigning the display content on

the secondary display device, the presentation will automatically be displayed on the primary display device.

 file:///C:/Users/Jess%20Unikewicz/Downloads/Yealink_VC120_Video_Conferencing_Endpoint_User_Guide_V20.6.pdf